Adopting ARM+FPGA+DSP audio processing and network digital transmission solution Integrates functions such as speech, check-in, voting, rating, short messaging, tea service, and zone output DSP+FPGA processors, with 20-channel zone matrix + 1- channel mixed output 20-channel simultaneous interpretation output, with built-in matrix processor Supports mixed use of wired/wireless units, up to 6 chairman units + 32 VIP units Can connect 4096 wired + 300 wireless units after expansion Maximum speaking units: 24 purely wired / 6 purely wireless / 18+6 mixed Integrated camera tracking, with RS422-controlled cameras TCP/IP protocol, supporting C/S and B/S architectures 5 conference modes, supporting unit detection and speaking timing reminders

Built-in high-performance DSP patented immersive acoustic algorithm The product has 16 LR inputs and 16 LR outputs It has the function of positioning and adjusting 16 input signals at the same time Software operations take effect in real time, improving ease of operation The user interface can adjust the sound source trajectory, preset trajectory and volume adjustment Suitable for all kinds of conference rooms, museums

• The conference controller allows connection of a maximum number of 128 conference units and with the extension controller, the conference system allows connection of up to 4096 units.
• Connection through 8-core aviation plugs in a series mode.
• Limitation of number of spokesman at a same time (1/2/3/4/5/6).
• Vote function, timed speech and other data management functions.
• 4.3″ TFT display/touch screen.
• Users can adjust the system time and back light duration, in order to save energy.
• Messages on the system LCD screen may be in Chinese or English
• Users can set a number of VIP speech units, which when the total number of activated units is less than the limit of 20 (20 in FREE mode and 10 in other modes), can be activated and if free of any limitation of conference mode. A maximum number of 30 VIP units are allowed.
• The smart conference system supports five conference modes, namely FIFO, NORMAL, VOICE, FREE and APPLY.
• The system has embedded a DSP, including low cut, frequency shifter and equalizer.
• The system can realize recording of the entire conference and provides two recording modes, namely automatic recording and manual recording, and the user can choose the desired one.
• The system provides unit inspection function, with which inspection to the conference units may be realized automatically or manually.
• The conference systems also provides a camera tracking system and 4 BNC camera ports through which the system can realize automatic camera tracking function.
• The system provides one RS232 serial port, with which the system can be connected to the central control system seamlessly, in addition, it also provides one RS422 serial port for connection of camera control circuit to realize centralized control on the 6 cameras.
• The 8-core aviation socket: one is for connection of interpreter controller, anther for connection to extension controller and three for conference units.
• Cannon socket: It is a secondary audio output port and is used to realize parallel output together with two secondary audio output RCA sockets (LINE OUT) and for connection to specialized amplifiers.
• The conference audio system also provides a +5V trigger voltage warning input port, which, together with the warning audio input port, is used to realize warning breaking in function.
• The system provides RJ45 ports under TCP/IP protocol, which is used for connection to the network where a PC application program will be used to control all functions of the system.
• The equipment casing is made from metal materials and all the lines and casing are properly grounded, so the system has an anti-static of 10kV in case of physical contact and 15kV in case of air contact.
• The system adopts high-grade appearance design, 2U standard chassis, and can be installed in a 19 inch standard cabinet.